Autelobd is one of the official distributors of Autel, All the products sold on Autelobd.com are original Autel tools.
Autelobd Technology Co., Ltd​​​​​​​
mavis@autelobd.com
+86-18026968053
English

Autel MaxiBAS BT608E OBD2 Scanner 12V 100 3000CCA Battery Tester Full System Diagnostic Tool Upgrad of BT508/BT506

5 0 Reviews
Autel MaxiBAS BT608E is an Android-based Wi-Fi touchscreen tablet comprehensive battery and electrical system diagnostic tool with adaptive conductivity technology to identify low-capacity batteries and reduce battery misdiagnosis.
Price: $ 473.59
Weight:
Availability:
Quantity:

PDF Export

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
sharethis sharing button
  • MaxiBAS BT608E

  • Autel

  • AT110

Autel MaxiBAS BT608E OBD2 Scanner 12V 100 3000CCA  Car Battery Tester Analyzer Diagnostic Registration Tool Free Update PK BT506


About MaxiBAS BT608E:


The BT608E is a touchscreen Battery & Electrical System analyzer that applies Adaptive Conductance, an advanced battery analysis method that produces a more accurate examination of the battery's cold cranking ability and reserve capacity, vital to determining a battery's true health.

The BT608E can display a quick health status of the existing battery, register a new battery and perform advanced battery and electrical system diagnostics. The BT608E 's VINscan function enables quick identification of the vehicle and battery specifications. Read/Clear codes on all available vehicles systems. Print or share customized reports via Wi-Fi or print test reports via the built-in thermal printer.

The Autel MaxiBAS BT608 can test 6- and 12-volt batteries up to 3000CCA and both 12-and 24-volt starting/charging systems. It has settings for Flood Lead-Acid, EFB, AGM, Spiral, and GEL battery types


Three highlights of the function:


Reduce Battery Misdiagnosis
Diagnose Low Capacity Batteries
Reduce Charge & Retest for Discharged Batteries

BT608E-1

MaxiBAS BT608E Main Features:


• Support in-vehicle and out-of-vehicle testing of passenger vehicle batteries
• Test 6- and 12-volt batteries: 100 - 3000 CCA
• Test 12- and 24-volt cranking/charging systems
• Test Flooded, AGM, AGM Spiral, EFB and GEL batteries
• Compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA
• One-touch Battery registration
• Quick display of battery specifications through battery barcode scan, Auto and manual VIN entry
• Illustration instruction guides for battery positioning and testing
• Print test reports via built-in thermal printer
• Read and erase codes of all available systems

BT608E-2

Advanced Adaptive Conductance Technology:


The BT608E applies adaptive conductance to produce a more accurate examination of the battery's cold-cranking ability and reserve capacity, vital to determining a battery's health. Compared to the conductance profiling technology, adaptive conductance can provide users with more accurate and quicker diagnostics for it uses dynamic load instead of fixed load, which allows adjusting the load according to the environment in the car. Besides, adaptive conductance has 30A discharge (10A for conductance profiling) for a faster battery test. Following is the benefits of adaptive conductance technology:


Reduce Battery Misdiagnosis:


INTERSTATE Statistics show that 50% of returned batteries are good and just need charging. With adaptive conductance technology adopted in the battery tester BT608E, the diagnostic accuracy rate reaches 95%, which is higher than conductance profiling with an accuracy of 45%.


Diagnose Low Capacity Batteries:


Some misdiagnoses of battery issues occur when the battery tester cannot quickly identify the battery capacity status. The battery tester BT608E can fix the issues with the adaptive conductance for its bad battery detection rate ups to 63.55%, which is about 15% (56.36%) faster than battery testers using conductance profiling.


Reduce Charge & Reset for Discharged Batteries:


Some other battery testers cannot perform SOH tests to identify discharge batteries and might do some reset and recharge in vain. With the adaptive conductance technology, the battery tester BT608E can quickly detect the battery SOH and save the diagnostic waiting time.

BT608E-3

In-vehicle Test:


In-vehicle Test is used for testing batteries that are installed in a vehicle. An in-vehicle test includes battery test, starter test, and generator test.


1.Battery Test:


Follow the guidance provided, technicians can do the battery test. The battery test results include a color-coded result summary, a list of test data such as SOC, Voltage, Measure Capacity, and repair tips. Even when a battery is in a poor state of charge, the battery tester BT608E can accurately test its potential for stored energy without necessitating a recharge prior to test and expedite diagnoses.


2.Starter Test:


Mechanics or DIYers can follow the on-screen instructions to complete the starter test. Start the engine and let it idle. The test results of the cranking system will display on the screen which include starting voltage, starting current and starting time.


3.Generator Test:


Through processing the alternator test, technicians are able to check the load voltage/current, no load voltage/current, and ripple. The direct test result will also display on the screen to tell whether the charging is normal, and whether there is an issue with the output or ripple.

BT608E-4

4.Print Test Reports Via Built-in Thermal Printer:


BT608E allows DIYers and technicians to print reports immediately after performing a test or later, all reports are saved in Data Manager.

- The internal printer is shipped with two rolls of thermal paper (2.3''wide by 0.98'' in diameter). Replacement rolls are available in most stationery stores;
- WIFI printing via the Autel PC MaxiSuite software;
- Email/ PDF Sharing of Test report;
- Customization: Report title, shop information, technician name.

BT608E-5

5.Car Battery Types Support:


Out-vehicle Test is used to test the condition of batteries that are not connected to a vehicle. This function aims to check the health status of the battery only.

Autel BT608 car load tester is designed to test 6V/12V Flooded, AGM, AGM Spiral, EFB and GEL batteries with CCA(100 to 3000 CCA), CA, SAE, EN, IEC, DIN, JIS and MCA standards. BT608 can test the battery state of health, offers illustration instruction guides for battery positioning and testing.

1.State of Charge: The amount of energy stored in the battery relative to its capacity.
2.Voltage: The difference in electric potential between the positive and the negative terminals of a battery.
3.Measure Capacity: Battery energy storage capacity measured in Cold Crank Amps.

BT608E-6


One Touch Battery Replacement/Registration:


1.Auto registration: Auto registration is often used after the successful installation of a new battery, including BMS reset and Electric appliance reset.

2.BMS reset: The BMS reset feature enables you to register a new battery after battery replacement.

3.Electric appliance reset: When the vehicle power is interrupted in order to replace the battery, and a memory saver has not been used, position settings on some vehicle components will be lost. These settings should be relearned.

4.Special function: Functions other than battery reset are categorized as special functions.

5.Battery usage history(BMW only): Battery usage history function will display the following three tests: SOC (State of Charge) in the last 5 days, Proportion of SOC duration, Estimated current mileage comparison (battery replacement)

Register Batteries for 53 Vehicle Makes:

Registering the battery is a necessary step to let your engine control module (DME) know the newly installed battery, and the vehicle will reset the old battery statistics, which help you avoid the below issues:

Overcharge to shorten battery life
Energy management system malfunction
Start-stop function malfunction (some other on-board electrical appliances cannot work normally)
Vehicle fails to start
The IGR malfunction and the energy recovery is invalid
After registration of the new battery, the battery tester BT608E can perform vehicle systems initialization to reset the components.


BT608E-7

All Available Systems Diagnostics:


In addition to the BT608's charging system capabilities, Autel OBD2 diagnostic tool offers technicians the ability to read and clear diagnostic trouble codes in all available systems as well as view code descriptions. Live data and freeze frame data are also available. The tool will display the code along with a description to aid the technician in his diagnostic process to find the root cause of the malfunction.


Automatically Scan VIN:


BT608E Auto Battery Test Scan Tool comes with Auto VIN, Auto Scan and Plate Scan features to acquire vehicle and battery specifications by simply scanning using the built-in 8MP HD camera.

Connect VCI with the vehicle through the vehicle's OBD Data Link Connector (DLC), and turn on the ignition, below information will be automatically recognized:

- The vehicle information such as make, model and year.
- The battery information tab such as the battery type, standard and capacity will display from the bottom of the screen.
- The battery temperature can also be automatically measured by the battery tester BT608E.
- Mechanics and DIYers can also use the Scan License or Scan Plate function to quickly obtain the vehicle's information.

Note: Scan feature is supported in limited vehicles or countries and regions. Please manually enter the license numbers if it is not available.

BT608E-8

Multimeter Compatible:


Connect the multimeter (sold separately) to the battery tester BT608E, technicians and Dyers can access its application directly from the home screen to perform AC/DC voltage, AC/DC current, and resistance measurements, and diode, and connectivity tests. The test results will be displayed in numbers or graphs on the screen of BT608E.

NOTE: The Multimeter we refer here is the compatibility, it is NOT included in this package.


Bluetooth & Wi-Fi Wireless Connection:


There is a VCI device available with the battery tester BT608E. Technicians and DIYers can connect the VCI to the vehicle and enter the VCI Manager menu on the BT608E for connection via Bluetooth and then you can check the communication status, and upgrade the VCI firmware. It also supports Wi-Fi connection for in-time software update.


Lifetime Free Updates:


Free software update for the lifetime of the battery tester ensures users can always enjoy the newest functions in time. The software includes the operating system, applications, battery testing, battery registration, and vehicle manufacturers. A notification will display when updates are available.


Data Manager:


The Data Manager application allows you to store, print, and review the saved files, manage workshop information and customer information records, and keep test vehicle history records. There are six main functions available: Test Records, Workshop Information, Image, PDF, Uninstall Apps, and Data Logging.



BT608E-9BT608E-10BT608E-11BT608E-12

Delivery Time:

4(1)

Previous: 
Next: 

Related Products

How to Buy from Autelobd.com?
 

Register/Sign In

About Us

Autelobd is a professional leader in China's Autel diagnostic tool scanner, Autel maxisys ultra, and Autel km100 manufacturer with high quality and reasonable price. I'd like to welcome you to contact us.
Contact Us

Phone: +86-18026968053
Whatsapp: +86-18026968053
Email: mavis@autelobd.com
 Longhua District, Shenzhen City, China
Subscribe to our newsletter and get more useful information on Autel Scanner
Copyright © 2023 Autelobd Technology Co., Ltd.All rights reserved.